Kiddie Ride Happy Ride Battery Usage
Battery power state display
When the display panel indicates 100%，it means full battery power, when the display panel shows “low battery, please charge” pleaase charge it in time, otherwise the battery will power loss, or damage caused by the battery charge and can not recharge.
How to charge the battery
Please Plug the charger circular plug into the left round port on the back of machine and tighten,as picture shows:Notes:Please make sure plug the charge port first,and then connect another side with 220V power supply,When the charge power light indicate red light means normal charging.If the indicator shows Green color,means fully charged or no charging
How to replace the battery
If battery need to be changed , please choose the storage battery which is in suitable capacity and the same specification .First step, close the power, then open the battery box which under the chair with machine-equipped key . As following picture, please take out the red dot line and blue dot line which is connected to the battery.
The red line means positive pole, the blue one means negative pole, then take out the battery. Please install the batteries following picture 2, Make sure the red line connect to the red dot on battery, the black line connect to the blue dot on battery.pls use a red line to connect the two batteries.
One side of the red line, pls connect to blue dot on battery, the other side of the red line, pls connect to red dot on the other battery. When battery replacing is finished, please check the connecting line is correct or not. If all is ok, then lock the battery box.
best battery usage temperature is 25-38 degree.lower temperature will cause lower power usage efficiency, when the temperature lower down 1 degree, the power efficiency will be lowered down 1%.