For the first use, it should be noted that the pump can only be powered on and used normally after it is filled with water. Only 3 simple manual operation steps to do it as below.
Water shooting machine, small mouth water bottle
Connect the orange tube to the white rubber pad in the original state, first press and hold the white rubber pad to the left, then grab the orange water tube and pull it out to the right,
Put the bottle filled with water against the water inlet of the orange tube and add water until it is full, about 1000 ml,
After adding water, grab the orange water pipe and insert it to the right until it reaches the end, the water addition is completed;
After the above manual operation is completed, turn on the machine and insert coins to do a trial test.Under normal circumstances, after about 10 seconds, the water gun will shoot the water jet normally. After 3 minutes of trial play, check the inside of cabinet to see if there is any water seepage in the joints of the water pipes. If there is water seepage, contact theseller to communicate and deal with it, and the business can be operated normally.