Project Description

Drill Madman Gift Game Machine

Specifications

  • Exterior Appearance:D100*W105*H182(cm)
  • Weight:About 200KG
  • Voltage:AC220V
  • Power:About150W
  • Implement:Token
  • Coin Box Capacity:About 5000 coins

Description

The machine is upgraded from the classic key master machine. It is with accurate proofreading and delicate movements. Easy to use. Support coin acceptor/token coin acceptor and bill acceptor.Mostly used for amusement center or shopping mall.
How to play: Pay to start the game, adjust the drill bit to the left and right within the specified time for horizontal alignment, press and hold the start button to make the drill bit move up, look at the timing button, such as the drill bit enters the lock smoothly. The drill will automatically rotate, so that the hanging gift will fall out of the warehouse and the player will get a gift reward.

drill madman gift game machine

How to play

  • Insert coin
  • Control the left-right movement of the drill by joystick
  • Press“Up”button,aim the gift hole then release.
  • If the drill goes in and rotate,then get the prize

Illustration of main-board’s function

board's

1、LED 1: mode 1 (as the pic shown above)

2、LED 2: mode 2 (as the pic shown above)

3、LED 3: mode 3 (as the pic shown above)

4、LED 4: mode 4 (as the pic shown above)

5、LED 5: mode 5 (as the pic shown above)

6、LED 6: mode 6 (as the pic shown above)

7、LED 7: mode 7 (as the pic shown above)

8、MODE button, the button to change mode

9、UP: the button to select

10、DOWN: the button to select

11、ENTER: the button to make a confirmation.

12、CLEAR: the button to delete all data

13、TEST: the button to test

Trouble Removal

When Er01 appears on the digital display, it shows there is failure of the switch on lower front of the drill.As below:

board'sWhen Er03 appears on the digital display, it shows there is failure of sensor.As below:

board's

When Er04 appears on the digital display, it shows there is failure of left switch.。As below:

When Er04 appears on the digital display, it shows there is failure of left switch.。As below:

When Er05 appears on the digital display, it shows there is failure of right switch.。As below:

When Er04 appears on the digital display, it shows there is failure of left switch.。As below:

When Er07 appears on the digital display, it shows there is failure of switch under drill.。As below:

board's

When Er08 appears on the digital display, it shows there is failure of sensor inside drill.。As below:

board's

When Er09 appears on the digital display it shows not connect with accounter .

board's

board's